Step 7. After you have separated the
two halves of the drum, find the two screws holding down the circuit board
indicated in the photo. Remove these 2 screws. You will be working
on the underside of this circuit board in Step 11.
! Note: These screws are different than the last 4 screws you removed and should be saved separately.
|
Introduction | Parts and Tools | Step 1 | Step 2 | Step 3 | Step 4 | Step 5 | Step 6 | Step 7 | Step 8 | Step 9 | Step 10 | Step 11 | Step 12 |