Step 7.
Using the two 1/2" to 3/4" 4 - 40 Round Head Machine Screws attach the switch plate as shown.
Be sure not to over tighten the screws, as this will press the switch down and keep it from working properly.
Test the switch.
|
Step 7. Using the two 1/2" to 3/4" 4 - 40 Round Head Machine Screws attach the switch plate as shown.
Be sure not to over tighten the screws, as this will press the switch down and keep it from working properly.
Test the switch.
|
|
| Introduction | Parts and Tools | Step 1 | Step 2 | Step 3 | Step 4 | Step 5 | Step 6 | Step 7 | Step 8 | Step 9 |