Step 2.
After removing the screws, slowly lift the top (the part with the big button) off the control and set aside.
You are now looking at a small circuit board with a screw holding it to the control case.
|
Step 2.
After removing the screws, slowly lift the top (the part with the big button) off the control and set aside.
You are now looking at a small circuit board with a screw holding it to the control case.
|
|
| Introduction | Parts and Tools | Step 1 | Step 2 | Step 3 | Step 4 | Step 5 | Step 6 | Step 7 | Step 8 | Step 9 | Step 10 |